WATER FLOW SWITCH
(Công tắc dòng chảy HFS-15A, HFS-20A, HFS-25A)
Type: HFS-25, HFS-20, HFS-15
(Dòng: HFS-25, HFS-20, HFS-15)
 
APPLICATION
 
(Công tắc dòng chảy HFS-15A, HFS-20A, HFS-25A được dùng để giám sát dòng chảy của chất lỏng như nước, ethylene glycol, hay các lưu chất không ăn mòn khác trong hệ thống chiller, bơm, máy nén, nồi hơi, etc.
 
*Yêu cầu chống nước và chống thấm model có thể được đặt làm tùy theo yêu cầu)
 
- The paddle type SPDT HFS series are designed to provide excellent 
performance where accuracy, reliability, and rugged construction (IP54) are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. 
- They can be wired to close one circuit and open a second circuit when 
liquid flow either exceeds or drops below the adjusted flow rate. 
- The HFS series are recommended for liquid pressure and temperature as 
mentioned below and must not be used on lines carrying liquids below 0 
degree C. 
- These series may be used on liquids with high salt or chlorine content but 
is not for use in hazardous atmospheres. 
- They may be also used outdoors but must be protected from weather or 
splashing water. 
- All series HFS flow switches are designed for use only as operating controls. 
- Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure. 
 
SPECIFICATION
Operating Pressure
 
10kgf/cm² (1MPa)
 
Withstand Pressure
 
17.5Kgf/cm² (1.75MPa)
 
Insulation Resistence
 
Over 100Ω, DC500VM
 
Withstand Voltage
 
AC1500V/1minute
 
Contact Point Life
 
1000K Cycle
 
Bellows Life
 
500K Cycle
 
Temperature of Fluid
 
Max 100°C (212°F)
 
Body Size
 
1"(HFS-25), 3/4"(HFS-20), 1/2"(HFS-15)
 
 
ELECTRICAL RATINGS
- See catalog
 
Download:  CATALOG